 |  |  |  |  |  |  |
- Fabrication for the transmission
- Engine & Trans. Fitted to the frame
- 2x2x3/16 Box Tubing was added to stiffen the frame back up
- The frame was then painted with ICI chemical resistant epoxy
and the hardener.
This next series of photos deals with easy removal of a pilot bearing. A friend of mine had not seen
it done this way before so I thought I would include it. First fill the bearing with grease then take
the alignment shaft provided with clutch kit to drive the bearing out , the grease will force the
bearing out. You can also use the alignment shaft to tap the new bearing in.
it done this way before so I thought I would include it. First fill the bearing with grease then take
the alignment shaft provided with clutch kit to drive the bearing out , the grease will force the
bearing out. You can also use the alignment shaft to tap the new bearing in.
